LEDPro wallpacks are designed with a traditional look, familiar design, and specifically utilizing the latest in high performance LED technology. They match the current footprint of existing HID wallpacks and can be used for typical mounting heights ranging from 8 to 18 feet, while providing a lateral spacing to mounting height ratio of up to 6:1.
Replacing 100W to 250W pulse start metal halide wall-mounted fixtures, they provide safety and security in many applications such as perimeters, building facades, stairwells, and entrance ways. LEDPro wallpacks consume up to 88% less energy over traditional HID sources, while having an operating life of 50,000 hours (L70).
• Traditional design
• Up to 75% energy savings vs. traditional HID sources
• 50,000 hour operating life (L70)
• 4000K (standard) CCT
• >80 CRI
• Instant on; zero restrike
HOUSING / LENS / OPTICS UV stabilized impact resistant polycarbonate front cover with integrated lens and internally painted bronze finish. Thermally efficient die-cast aluminum housing in natural finish with integrated heat sink fins for
cooler operation and maximum LED operating life. White molded reflector and prismatic polycarbonate lens provide a Type IV distribution. Weatherproof silicone gasketing seals front face plate to housing to keep out contaminants.
LEDS Delivered light output of 3,825 lumens at 38 watts, 4000K CCT; >80 CRI. LED operating life is 50,000 hours (L70). Light engine consists of one Chip on Board (COB) LED array mounted directly to aluminum housing. COB LED array is 3 step binned for color temperature consistency.
ELECTRICAL Power supply is 120-277V operation. Power factor is >0.9. Power supply is mounted in direct contact with aluminum housing for cooler operation and longer life. Drive current is 930mA. Integrated 120V button photocell for automatic dusk to dawn operation. Photocell models are 120V only. Optional 277V photocell available. Suitable for use in operating temperatures of -22˚F (-30˚C) to 104˚F (40˚C).
ACCESS / WIRING Front cover attaches to back housing via 4 captive screws. Mounts to a recessed junction box or surface mount with conduit. Die-cast aluminum housing contains knockout pattern and conduit entry points on back and bottom.
MOUNTING The recommended wall mounting height for the LEDPro wallpack is 8ft. to 12ft. with spacing distances of up to two times the mounting height.
LISTINGS C-UL-US Listed wet location.
WARRANTY 5 year limited warranty.